| Single-position meter socket | A detached house or small building with one utility meter and a separate electrical panel. | Commonly selected for a 100–200 A service, subject to utility approval and local code. | About $50–$250 | Confirm socket type, service rating, mounting location, conductor requirements, and utility rules. Replacement may require a scheduled utility disconnect. | Limited. A future service upgrade may require a different socket, service conductors, or panel. |
| Meter-main combination enclosure | Homes where the meter and service disconnect are installed together, often outdoors. | Often available for 100–200 A services; breaker spaces and approved configurations vary by model and jurisdiction. | About $200–$700 | Check the required disconnect arrangement, available breaker positions, grounding and bonding details, and outdoor enclosure rating. | Moderate if spare breaker spaces and capacity are provided; the service rating itself cannot be exceeded. |
| Multi-position meter center | Multi-unit residential or commercial properties requiring separate utility meters. | Built for multiple meter positions; service and tenant-disconnect arrangements depend on the design. | About $800–$4,000 or more | Requires coordination among the electrician, utility, and permitting authority. Wall space, service capacity, and access for meter reading are key constraints. | Good when spare meter positions and electrical capacity are designed in; adding positions later may require a larger service assembly. |
| Higher-capacity or commercial meter enclosure | Commercial buildings, larger properties, or services with loads beyond typical residential requirements. | May use larger service ratings or a utility-specified metering arrangement; requirements are project-specific. | About $500–$2,000 or more for the enclosure; metering equipment can add substantially to the total. | Utility engineering review may be needed. Confirm the metering method, fault-current rating, service equipment, and installation clearances before purchase. | Potentially high if load calculations, service equipment, and utility approval allow for planned demand growth. |
| Replacement enclosure for an existing installation | A damaged, corroded, or obsolete meter enclosure being replaced at an existing property. | Must match the approved service configuration or be accepted as part of a permitted upgrade. | About $50–$700 for many common residential enclosures | The condition of wiring, service conductors, wall, and grounding system can change the scope. A licensed electrician should assess the installation. | Usually low unless the replacement is deliberately sized and approved for a planned service upgrade. |